Sanjeev Scientific Udyog
Ambala, Haryana
GST No. 06AVYPK2228H1ZA
TrustSEAL Verified
Call 08048414585
73% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | ssu |
| Usage/Application | Laboratory |
| Type | Horizontal |
| Material | M.S |
| Air Flow | yes |
| Surface Finish | Powder Coated |
| Model Name/Number | SSU-140 |
| Size | 3X2X2 |
| Height | yes |
| Voltage | 220 VOLT AC. |
LAMINAR AIR FLOW (HORIZONTAL) Make: SSU. Specification: The body is constructed in double walled M.S powder coating outer
All specification meets the U.S. Federal Standard 209E(Class 100 purity)
The work table is made of stainless steel 304 grade. All joints are sealed with scholastic sealant.
Transparent front and side panels of UV resistant Polycarbonate sheet fully transparent fixed with clamps.
The unit is fitted with per-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.97% with cold, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger.
Using a dynamic machine, the blower and motor assembly ISI marked is statically and dynamically balanced.
Blower Assembly with high RPM motor, enclosed in an SS casing suitably suspended in a pair springs & connected to the filter chamber through flexible canvas duct
Blowers are mounted on vibration isolation mounts to Minimize vibration and possess noiseless operation.
Height of the working table provides comfortable “ Sit Down” working position for the operation to work on 220/230 volts AC. Supply
Individual controlling switch & indicator for blower, UV And fluorescent tubes.
Technical Detail
Working Size : 3ft x 2ft x2ft (WxDxH)
Table : SS 304grade Platform
Pre Filter : Media Synthetic, non-woven polyester fibers (1nos)3ft x 2ft x6"of 10 micron HEPA Filters : Media Ultra clean glass fiber paper - imported down to 0.3 micron HEPA size : 3ft x 2ft x 6” (1nos) Retention : 0.3 Micron Efficiency : 99.97% Air Flow : Horizontal Door : UV resistant polycarbonate door in front facia with magnet lock Add on feature: Provision of cock ( air , vacuum) 1 UV tube : 1x15W Philips Fluorescent tube: 1x15W Philips Blower Assembly :DIDW type ISI marked assembly motors) Leg Levellers : To adjust by +/- 10 mm Noise level : >= 65 DB Manometer : 0-100 mm Power :220-230 Volts, 50 Hz Single Phase Micro proser based controller with UV light and florescent light and blower sapped controller. |
|
|
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | ssu |
| Type | s.s |
| Material | Stainless Steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Voltage | 240 V |
| Power Supply | 220 volt. |
| Frequency | 50 Hz |
| Treated air volume | 300-800 M3/h |
LAMINER FLOW CABINET.
.................................................................................................................................
The cabinets are fabricated out of thick wooden/ M.s / S.S. Interior The worktable is made of thick clad at top s.s sheet. Side panels are made out of thick transparent flexi glass duly Framed. The unit is fitted with pre-filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with Cold DOP and 99.97% with hot DOP. Thus retaining all air-biome particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ESE MARKED Motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated By fluorescent lighting fitted to the unit. Height of the working table provides comfortable “SIT DOWN” Working position for the operation. To work on 220/230 volts A.C. supply. Supplied complete with sun mica Table top, HEPA filters, pre-filter and fluorescent illumination.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | ssu |
| Usage/Application | Laboratory |
| Type | Horizontal |
| Material | wooden |
| Surface Finish | Polished |
| Air Flow | yes |
| Model Name/Number | ssu-140a |
| Size | 2x2x2 |
| Voltage | 240 V |
| Color | White |
| Lighting Type | yes |
| Frequency | 50 Hz |
| Height | up to 6 feet |
| Thickness | up to 25 mm |
LAMINER FLOW CABINET.
.................................................................................................................................
The cabinets are fabricated out of thick wooden/ M.s / S.S. Interior The worktable is made of thick clad at top s.s sheet. Side panels are made out of thick transparent flexi glass duly Framed. The unit is fitted with pre-filter. Air is drawn through pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with Cold DOP and 99.97% with hot DOP. Thus retaining all air-biome particles of size 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced ESE MARKED Motor of 1/5 H.P. capacity operates with minimum noise level. The working area is illuminated By fluorescent lighting fitted to the unit. Height of the working table provides comfortable “SIT DOWN” Working position for the operation. To work on 220/230 volts A.C. supply. Supplied complete with sun mica Table top, HEPA filters, pre-filter and fluorescent illumination.
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | SSU |
| Type | Horizontal |
| Material | stainless steel |
| Surface Finish | Polished |
| Usage/Application | Laboratory |
| Color | silver |
| Power Supply | 220 volt ac |
|
LAMINAR AIR FLOW (HORIZONTAL) Make: SSU. Specification: The body is constructed in double walled S.S.
The work table is made of stainless steel 304 grade. All joints are sealed with scholastic sealant.
Transparent front and side panels of UV resistant Polycarbonate sheet fully transparent fixed with clamps.
The unit is fitted with per-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.97% with cold, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger.
Using a dynamic machine, the blower and motor assembly ISI marked is statically and dynamically balanced.
Blower Assembly with high RPM motor, enclosed in an SS casing suitably suspended in a pair springs & connected to the filter chamber through flexible canvas duct
Blowers are mounted on vibration isolation mounts to Minimize vibration and possess noiseless operation.
Height of the working table provides comfortable “ Sit Down” working position for the operation to work on 220/230 volts AC. Supply
Individual controlling switch & indicator for blower, UV And fluorescent tubes.
Technical Detail
Working Size : 4ft x 2ft x2ft (WxDxH)
Table : SS 304grade Platform
Pre Filter : Media Synthetic, non-woven polyester fibers (2nos)4ft x 2ft x6"of 10 micron HEPA Filters : Media Ultra clean glass fiber paper - imported down to 0.3 micron HEPA size : 3ft x 2ft x 6” (2nos) Retention : 0.3 Micron Efficiency : 99.97% Air Flow : Horizontal Door : UV resistant polycarbonate door in front facia with magnet lock Add on feature: Provision of cock ( air , vacuum) 1 UV tube : 1x15W Philips Fluorescent tube: 1x15W Philips Blower Assembly :DIDW type ISI marked assembly motors) Leg Levellers : To adjust by +/- 10 mm Noise level : >= 65 DB Manometer : 0-100 mm Power :220-230 Volts, 50 Hz Single Phase Micro proser based controller with UV light and florescent light and blower sapped controller. |
01. |
60000/- |
Additional Information:
