- Home
- ยป
- Our Products
- »
- Vertical Laminar Air Flow
Vertical Laminar Air Flow
Vertical Laminar Airflow
Product Brochure
Type | Vertical |
Brand | SSU |
Surface Finish | Powder Coated |
Usage/Application | Laboratory |
Material | SS and Glass |
Model Name/Number | SSU-140V |
Size | 3x2x2 Feet |
LAMINAR AIR FLOW (HORIZONTAL)
Make: SSU.
Specification:
The body is constructed in double walled S.S.
The work table is made of stainless steel 304 grade.
All joints are sealed with scholastic sealant.
Transparent front and side panels of UV resistant Polycarbonate sheet fully transparent fixed with clamps.
The unit is fitted with per-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.97% with cold, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger.
Using a dynamic machine, the blower and motor assembly ISI marked is statically and dynamically balanced.
Blower Assembly with high RPM motor, enclosed in an SS casing suitably suspended in a pair springs & connected to the filter chamber through flexible canvas duct
Blowers are mounted on vibration isolation mounts to Minimize vibration and possess noiseless operation.
Height of the working table provides comfortable “ Sit Down” working position for the operation to work on 220/230 volts AC. Supply
Individual controlling switch & indicator for blower, UV And fluorescent tubes.
Technical Detail
Working Size : 4ft x 2ft x2ft (WxDxH)
Table : SS 304grade Platform
Pre Filter : Media Synthetic
HEPA Filters : Media Ultra clean glass fiber paper -
HEPA size : 3ft x 2ft x 6” (2nos)
Efficiency : 99.97%
Air Flow : Horizontal
Door : UV resistant polycarbonate door in
front facia with magnet lock
Add on feature: Provision of cock ( air , vacuum) 1
UV tube : 1x15W Philips
Fluorescent tube: 1x15W Philips
Blower Assembly :DIDW type ISI marked assembly
motors)
Leg Levellers : To adjust by +/- 10 mm
Noise level : >= 65 DB
Manometer : 0-100 mm
Power :220-230 Volts, 50 Hz Single Phase
Micro proser based controller with UV light and florescent light and blower sapped controller.Laminar Air Flow
Product Brochure
Brand | SSU |
Material | SS and Glass |
Surface Finish | Powder Coated |
Usage/Application | Laboratory |
Voltage | 220-230 V |
Noise Level | 65 dBA |
Air Flow | Horizontal |
Efficiency | 99.97% |
Model Name/Number | SSU-141 |
Particle Retention | 0.3 Micron |
Country of Origin | Made in India |
Material Grade | SS 304 |
UV Tube | 1x15W |
LAMINAR AIR FLOW (HORIZONTAL)
Make: SSU.
Specification:
The body is constructed in double walled S.S.
The work table is made of stainless steel 304 grade.
All joints are sealed with scholastic sealant.
Transparent front and side panels of UV resistant Polycarbonate sheet fully transparent fixed with clamps.
The unit is fitted with per-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.97% with cold, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger.
Using a dynamic machine, the blower and motor assembly ISI marked is statically and dynamically balanced.
Blower Assembly with high RPM motor, enclosed in an SS casing suitably suspended in a pair springs & connected to the filter chamber through flexible canvas duct
Blowers are mounted on vibration isolation mounts to Minimize vibration and possess noiseless operation.
Height of the working table provides comfortable “ Sit Down” working position for the operation to work on 220/230 volts AC. Supply
Individual controlling switch & indicator for blower, UV And fluorescent tubes.
Technical Detail
Working Size : 4ft x 2ft x2ft (WxDxH)
Table : SS 304grade Platform
Pre Filter : Media Synthetic, non-woven polyester fibers (2nos)4ft x 2ft x6"of 10 micron
HEPA Filters : Media Ultra clean glass fiber paper -
imported down to 0.3 micron
HEPA size : 3ft x 2ft x 6” (2nos)
Retention : 0.3 Micron
Efficiency : 99.97%
Air Flow : Horizontal
Door : UV resistant polycarbonate door in
front facia with magnet lock
Add on feature: Provision of cock ( air , vacuum) 1
UV tube : 1x15W Philips
Fluorescent tube: 1x15W Philips
Blower Assembly :DIDW type ISI marked assembly
motors)
Leg Levellers : To adjust by +/- 10 mm
Noise level : >= 65 DB
Manometer : 0-100 mm
Power :220-230 Volts, 50 Hz Single Phase
Micro proser based controller with UV light and florescent light and blower sapped controller.